亚洲国产成人久久一区www,人妻办公室出轨上司HD院线,日本aⅴ精品中文字幕,精品国内综合一区二区

As we all know, the rapid scouring process of the whole process water disposal device! The traditional equipment is to use salt pump to write salt water into the glass tank membrane cleaning water equipment, full-automatic equipment is to use a dedicated built-in ejector to inhale salt water (as long as the water has a certain pressure). In the process of practice, the regeneration effect of brine flowing through resin at a slower speed is better than that of resin soaked in brine alone. So the softening water equipment is regenerated by brine flowing through resin at a slower speed. This process usually takes about 30 minutes, and the practice time is affected by the amount of salt used.

Slow Scouring (Replacement) of Whole Water Disposal Device: After flowing through the resin with brine, the process of gradually scouring all the salts in the resin with raw water at the same flow rate is called slow scouring, because there are still many calcium and magnesium ions on the functional groups exchanged by sodium ions in the process of scouring. According to the experience of practice, this process is repeated. The first process of life, so many people call this process replacement. This process is usually the same as the time of salt absorption, i.e. about 30 minutes.

Rapid scouring of whole process water disposer: In order to completely wash the residual salt out of clean food water equipment, the flow rate close to the practical work should be selected, and the resin should be scoured with raw water. At the end of this process, the effluent should be qualified soft water. Usually, the fast scouring process of the electronic water disposer is 5-15 minutes.

Author: Hangzhou Water Shield Technology Co., Ltd.

Key words: food water equipment, glass tank membrane cleaning water equipment