company news
company news / 公司新聞
Classification of swimming pool water treatment equipment?
There are many kinds of water treatment equipment in swimming pool, such as traditional deionization water treatment equipment and wall-mounted swimming pool equipment. There are many differences among the three kinds of equipment.
First of all, there are differences among the three in terms of cyclic filtration. The traditional swimming pool water treatment equipment of coating water treatment equipment uses sand filter to filter, generally uses single or multi-layer filter material to filter, generally uses 30-45M/H filtration speed. After normal filtration, the effluent effect is remarkable. The turbidity glass tank membrane cleaning water equipment can be maintained below 5NTU. When cleaning him, the advanced valve body can adjust the direction of water flow and the way of operation at will. But the filtering effect is general, and the maximum use of about 7 or 8 years, it has to be replaced. The quartz sand in it has to be replaced again in about two years. It's troublesome to maintain.
The wall-mounted equipment adopts the general filtration mode, and a filter membrane is added to the outlet of the pump. The effluent effect of such equipment is general, and the fine particles in the water can not be filtered out. It uses manual dismantling and washing or membrane replacement, the general filter membrane must be replaced after one year of use. Its cleaning process is complex, usually two people need 12 hours.
Gravity automatic water treatment equipment saves 100% manpower, 100% drugs, 100% consumables, 80% water supply, 80% electricity and 80% heat. Equipment purification index and automation operation have reached or exceeded the international leading level. The operation of the equipment saves more than 100% manpower, 70% backwashing water, 80% recharge water in swimming pool, 80% energy consumption and 90%-100% medicines such as flocculants, coagulants and coagulants. The whole system adopts new UPVC corrosion resistant material, and the product life is not less than 30 years. The quality of effluent is far superior to other similar products, which has become an innovative revolution in the industry. There are only a few domestic manufacturers of this equipment.
Secondly, there are also differences in the addition of medicines between the two. Traditionally, coagulant is added before filtration to settle fine particles in water, and disinfectant or PH balance agent is added after filtration. In the way of stealing, flowmeters are usually used to control the dosage of medicines, and automatic control can be conveniently carried out. The wall-mounted swimming pool water treatment equipment is the most taboo to add coagulant before filtration. When adding drugs, two dosers are usually set up.
Moreover, there are some differences in the use of thermostatic equipment between the two. Traditional equipment uses heat exchanger, electric constant temperature or heat pump with constant temperature to save energy. And the constant temperature equipment is automatically controlled. However, the wall-mounted swimming pool water treatment equipment has no constant temperature system and is not suitable for warm water swimming pool.
In addition, they also have differences in pools and coastal facilities. Traditional equipment has traditional stainless steel and water supply nozzle. At the same time, its feed nozzle layout is reasonable, and the dead water area is very few, which fully guarantees the effect of circulating filtration. His safety is relatively high, water area only 12V lighting power supply, enough to ensure the safety of swimmers. The wall-mounted equipment has many shortcomings in this respect. The equipment is set on the shore, which increases the danger of walking and useful. There are fewer water supply points and more dead water areas. There is 220V voltage in the water area, which threatens the personal safety of swimmers.
Wall-mounted swimming pool integrator occupies a high share in the market of swimming pool equipment, especially in the market of villa swimming pool equipment. The wall-mounted swimming pool integrator has completely conquered the whole villa swimming pool equipment market with its quality and near perfect cost performance ratio. When the swimming pool operator mentions the villa swimming pool equipment, his first reaction is without exception: wall-mounted swimming pool integrator.
When did the origin of wall-mounted pool integrator and villa pool equipment begin? This goes back to the most popular real estate Dynasty - that is, villas began to penetrate into people's lives. People begin to accept villa life as a way of life, which means that people begin to think about quality, taste, and even the way of elegant life. It is because of the appearance of villas that villa courtyard and villa swimming pool are designed naturally.
Villa swimming pool design is naturally inseparable from the villa swimming pool equipment. Villa swimming pool equipment in the villa swimming pool designer's eyes, just like a pen pole in the eyes of writers to show or indispensable, that one of the weight, we can imagine. The wall-mounted swimming pool integrator is so perfect in the life of villa swimming pool equipment. It seems that the swimming pool operator's love for wall-mounted swimming pool integrator has reached a state that can not extricate itself and be judged.
The above contents are sorted out according to the problems encountered in the actual work of the trainees, for reference. If there are any problems, please communicate and correct them in time.
Author: Hangzhou Water Shield Technology Co., Ltd.
Website: http://www.zjhzsd.com/
Key words: deionized water treatment equipment, coating water treatment equipment, glass tank membrane cleaning water equipment