亚洲国产成人久久一区www,人妻办公室出轨上司HD院线,日本aⅴ精品中文字幕,精品国内综合一区二区

First, garage, outdoor equipment and other areas;

2. Before water treatment equipment installation, it is necessary to reserve corresponding space, outlet pipe interface of deionized water treatment equipment, sewage pipe (or floor drain), and eye socket of 220V single-phase, three-wire and five-coating water treatment equipment.

3. If water treatment equipment needs to be installed outdoors, sunscreen and anti-freezing methods are needed; the space required for equipment is 50 mm in front and back, and 100 mm in top.

4. At the inlet and outlet ports, one-inch glass tank membrane cleaning water equipment external wire interface or 3/4 external wire interface should be reserved, with a mid-axle spacing of 10-15 cm. Their vertical distance from the ground depends on the size of the equipment.

5. Water treatment equipment is accompanied by a sewage hose, which connects with the reserved sewage pipe. The reserved sewage pipe should be 40cm high, and its orientation should be as close as possible to the wall and not more than 50cm away from the equipment. If the equipment is placed outdoors, it can be directly discharged into the sewer passage.

6. The power outlet shall be above the water treatment equipment and within one meter of the distance from the equipment.

7. For cabinet-type equipment, when decorating cabinets, the device scale of water treatment equipment must be considered, and the corresponding space should be reserved.

8. Prevent the installation of water treatment equipment near the heat source (or adopt insulation measures);

9. If the water supply pressure is less than 2 kg, the booster pump should be installed at the back end of the water meter and the front end of the equipment.

Author: Hangzhou Water Shield Technology Co., Ltd.

Website: http://www.zjhzsd.com/

Key words: deionized water treatment equipment, coating water treatment equipment, glass tank membrane cleaning water equipment